Remove the drive cover before you start this procedure.

  1. Remove the cable from the clamps.
    Figure 1. Remove the Fan Cable
    • Fan unit
    • Clamps
    • Fan cable
  2. Loosen the screws that safety the fan unit and slide the fan unit to the right.
    Note:

    To remove the fan unit, it is only necessary to loosen the screws.

    Figure 2. Slide the Fan Unit
    • Fan unit
    • Screws
  3. Disconnect the relay connector and remove the fan unit.
    Figure 3. Remove the Fan Unit
  4. Remove the screws that safety the circulation fan and remove the fan.
    Figure 4. Remove the Circulation Fan
    • Circulation fan