You can examine a maximum of 10 fault codes and dates and times that the faults occurred.

Note:

  • To monitor the date and time of faults, you must first set the date and time on the keypad.

  • If the keypad does not have a clock battery, you must set the date and time each time you energize the drive.

  1. Push [F2 Key] (Home) to show the HOME screen.
    Note:

    • The keypad will show [Home] in the top right corner when the HOME screen is active.

    • If [Home] is not shown on [F2 Key], push [F1 Key] (Back) to show [Home] on [F2 Key].

  2. Push [F2 Key] (Menu).
  3. Push [Up arrow key] or [Down arrow key] to select [Modified Param / Fault Log], then push [ENTER Key].
  4. Push [Up arrow key] or [Down arrow key] to select [Fault Log], then push [ENTER Key].
  5. Push [Up arrow key] or [Down arrow key] to show the fault history you will examine.