The procedure in this section shows how to show the selected monitor data as a trend plot.

  1. Push [F2 Key] [Home] to show the HOME screen.
    Note:

    • The keypad will [Home] in the top right corner when the HOME screen is active.

    • If [Home] is not shown on [F2 Key], push [F1 Key] [Back] to show [Home] on [F2 Key].

  2. Push [F2 Key] [Menu].
  3. Push [Up arrow key] or [Down arrow key] to select [Monitors], then push [ENTER Key].
  4. Push [Up arrow key] or [Down arrow key] to select [Trend Plot], then push [ENTER Key].

The screen will show the monitors as shown in this figure.

Note:

Push [ENTER Key] [Hold] to switch between Pause and Restart for the monitor display. The “Hold (ENTER)” message flashes while you pause monitoring.