Code

Name

Causes

Possible Solutions

AEr

Station Address Setting Error

The node address for the communication option is not in the permitted setting range.

  • For CC-Link communication, set F6-10 [CC-Link Node Address] correctly.

  • For MECHATROLINK communication, set F6-20 [MECHATROLINK Station Address] correctly.

  • For CANopen communication, set F6-35 [CANopen Node ID Selection] correctly.
Note:

If the drive detects this error, the terminal set to H2-01 to H2-04 = 10 [MFDO Function Select = Alarm] will be activate.