|
Digital Input Function Selection
|
        
Sets the data format of digital input signals. This parameter is enabled when o1-03 = 0 or 1 [Frequency Display Unit Selection = 0.01 Hz or 0.01% (100% = E1-04)].
Note:
When o1-03 = 2 or 3 [Revolutions Per Minute (RPM) or User Units (o1-10 & o1-11)], the input signal will be BCD. The o1-03 value sets the setting units.
- 0
- BCD, 1% units
-
- 1
- BCD, 0.1% units
-
- 2
- BCD, 0.01% units
-
- 3
- BCD, 1 Hz units
-
- 4
- BCD, 0.1 Hz units
-
- 5
- BCD, 0.01 Hz units
-
- 6
- BCD (5-digit), 0.02 Hz
-
- 7
- Binary input
-
The setting unit and setting range change when the value set in F3-03 [Digital Input Data Length Select] changes.
-
F3-03 = 0 [8-bit]: 100%/255 (-255 to +255)
-
F3-03 = 1 [12-bit]: 100%/4095 (-4095 to +4095)
-
F3-03 = 2 [16-bit]: 100%/30000 (-33000 to +33000)
- 8
- Multi-Function Digital Input
-
|