This procedure will set all parameters with changed values to their default settings.

  1. Push [F2 Key] (Home) to show the HOME screen.
    Note:

    • The keypad will show [Home] in the top right corner when the HOME screen is active.

    • If [Home] is not shown on [F2 Key], push [F1 Key] (Back) to show [Home] on [F2 Key].

  2. Push [F2 Key] (Menu).
  3. Push [Up arrow key] or [Down arrow key] to select [Modified Param / Fault Log], then push [ENTER Key].
  4. Push [Up arrow key] or [Down arrow key] to select [Modified Parameters], then push [ENTER Key].
  5. Push [ENTER Key].
  6. Push [Up arrow key] or [Down arrow key] to select the parameters to return to their default settings, then push [ENTER Key].
  7. Push [F2 Key] (Default).
  8. Push [ENTER Key].

The modified parameters are now set to default values.