Code

Name

Causes

Possible Solutions

oPE06

Control Method Selection Error

A1-02 = 1, 3, or 7 [Control Method Selection = CL-V/f, CLV, CLV/PM], but there is no encoder option connected the drive.

  • Connect an encoder option the drive.

  • Set A1-02 correctly.

You supplied external 24 V power to terminals PS-AC when:

  • There is an encoder option installed the drive

  • The drive main circuit power supply is de-energized

  1. De-energize the drive main circuit power supply and the external 24 V power supply to terminals PS-AC.

  2. After the keypad display goes out, energize the drive main circuit power supply again.

  3. Supply the external 24 V power to terminals PS-AC.

When you use an encoder option, energize the drive main circuit power supply.