Yaskawa SS7 Series ECO PM Motors

Table 1. EST2 Series Motor Code Setting for Specification of 200 V at 1750 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	5206	5208	520A	520B	520D	520E	520F	5210
	Voltage Class	V	200	200	200	200	200	200	200	200
	Capacity	kW	2.2	3.7	5.5	7.5	11	15	18.5	22
	Motor Rotation Speed	min^-1	1750	1750	1750	1750	1750	1750	1750	1750
E5-02	PM Motor Rated Power	kW	2.20	3.70	5.50	7.50	11.00	15.00	18.50	22.00
E5-03	PM Motor Rated Current (FLA)	A	9.56	16.10	22.70	29.80	41.6	57.5	69.2	80.2
E5-04	PM Motor Pole Count	-	12	12	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	0.213	0.141	0.083	0.076	0.102	0.063	0.041	0.032
E5-06	PM d-axis Inductance (mH/phase)	mH	1.60	1.20	0.80	0.75	0.95	0.94	0.76	0.62
E5-07	PM q-axis Inductance (mH/phase)	mH	2.18	1.63	1.20	1.14	1.17	1.24	0.90	0.75
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	95.9	96.6	102.6	107.2	110.0	97.4	109.9	107.4
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	175.0	175.0	175.0	175.0	175.0	175.0	175.0	175.0
E1-05	Maximum Output Voltage	V	190.0	190.0	190.0	190.0	190.0	190.0	190.0	190.0
E1-06	Base Frequency	Hz	175.0	175.0	175.0	175.0	175.0	175.0	175.0	175.0
E1-09	Minimum Output Frequency	Hz	8.8	8.8	8.8	8.8	8.8	8.8	8.8	8.8
C5-17	Motor Inertia	kgm²	0.0067	0.0084	0.012	0.014	0.012	0.031	0.038	0.044
L3-24	Motor Accel Time @ Rated Torque	s	0.102	0.076	0.073	0.061	0.037	0.069	0.068	0.067
n5-02	Motor Inertia Acceleration Time	s	0.102	0.076	0.073	0.061	0.037	0.069	0.068	0.067
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	260.0	260.0	260.0	260.0	260.0	290.0	290.0	290.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	980	934	900	721	490	344	393	407
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	490	467	450	360	245	172	196	203
n8-57	HFI Overlap Selection	-	1	1	1	1	1	1	1	1
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150	150

Table 2. EST2 Series Motor Code Setting for Specification of 200 V at 1750 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	5212	5213	5214	5215	5216	5217	5218
	Voltage Class	V	200	200	200	200	200	200	200
	Capacity	kW	30	37	45	55	75	90	110
	Motor Rotation Speed	min^-1	1750	1750	1750	1750	1750	1750	1750
E5-02	PM Motor Rated Power	kW	30.00	37.00	45.00	55.00	75.00	90.00	110.00
E5-03	PM Motor Rated Current (FLA)	A	109.0	137.0	153.0	187.0	253.0	298.0	365.0
E5-04	PM Motor Pole Count	-	12	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	0.020	0.018	0.010	0.008	0.007	0.005	0.004
E5-06	PM d-axis Inductance (mH/phase)	mH	0.43	0.39	0.31	0.24	0.25	0.11	0.14
E5-07	PM q-axis Inductance (mH/phase)	mH	0.52	0.44	0.44	0.34	0.30	0.21	0.23
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	113.5	115.0	124.3	129.1	137.9	119.6	127.7
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	175.0	175.0	175.0	175.0	175.0	175.0	175.0
E1-05	Maximum Output Voltage	V	190.0	190.0	190.0	190.0	190.0	190.0	190.0
E1-06	Base Frequency	Hz	175.0	175.0	175.0	175.0	175.0	175.0	175.0
E1-09	Minimum Output Frequency	Hz	8.8	8.8	8.8	8.8	8.8	8.8	8.8
C5-17	Motor Inertia	kgm²	0.060	0.067	0.210	0.25	0.30	0.34	0.44
L3-24	Motor Accel Time @ Rated Torque	s	0.068	0.061	0.157	0.155	0.136	0.128	0.134
n5-02	Motor Inertia Acceleration Time	s	0.068	0.061	0.157	0.155	0.136	0.128	0.134
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	290.0	290.0	300.0	300.0	300.0	300.0	300.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	432	406	364	385	323	392	292
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	216	203	182	192	161	196	146
n8-57	HFI Overlap Selection	-	1	1	1	1	1	1	1
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150

Table 3. EST2 Series Motor Code Setting for Specification of 400 V at 1750 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	5236	5238	523A	523B	523D	523E	523F	5240	5242
	Voltage Class	V	400	400	400	400	400	400	400	400	400
	Capacity	kW	2.2	3.7	5.5	7.5	11	15	18.5	22	30
	Motor Rotation Speed	min^-1	1750	1750	1750	1750	1750	1750	1750	1750	1750
E5-02	PM Motor Rated Power	kW	2.20	3.70	5.50	7.50	11.00	15.00	18.50	22.00	30.00
E5-03	PM Motor Rated Current (FLA)	A	4.78	8.05	11.30	14.90	20.8	28.7	34.6	40.1	54.4
E5-04	PM Motor Pole Count	-	12	12	12	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	0.852	0.564	0.332	0.304	0.408	0.252	0.164	0.128	0.080
E5-06	PM d-axis Inductance (mH/phase)	mH	6.40	4.80	3.20	3.00	3.80	3.76	3.04	2.48	1.72
E5-07	PM q-axis Inductance (mH/phase)	mH	8.72	6.52	4.80	4.56	4.68	4.96	3.60	3.00	2.08
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	191.8	193.2	205.2	214.4	220.0	194.8	219.8	214.8	227.0
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	175.0	175.0	175.0	175.0	175.0	175.0	175.0	175.0	175.0
E1-05	Maximum Output Voltage	V	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0
E1-06	Base Frequency	Hz	175.0	175.0	175.0	175.0	175.0	175.0	175.0	175.0	175.0
E1-09	Minimum Output Frequency	Hz	8.8	8.8	8.8	8.8	8.8	8.8	8.8	8.8	8.8
C5-17	Motor Inertia	kgm²	0.0067	0.0084	0.012	0.014	0.012	0.031	0.038	0.044	0.060
L3-24	Motor Accel Time @ Rated Torque	s	0.102	0.076	0.073	0.061	0.037	0.069	0.068	0.067	0.068
n5-02	Motor Inertia Acceleration Time	s	0.102	0.076	0.073	0.061	0.037	0.069	0.068	0.067	0.068
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	260.0	260.0	260.0	260.0	260.0	290.0	290.0	290.0	290.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	980	934	900	721	490	344	393	407	433
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	490	467	452	360	245	172	196	203	216
n8-57	HFI Overlap Selection	-	1	1	1	1	1	1	1	1	1
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150	150	150

Table 4. EST2 Series Motor Code Setting for Specification of 400 V at 1750 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	5243	5244	5245	5246	5247	5248	5249	524A	524C
	Voltage Class	V	400	400	400	400	400	400	400	400	400
	Capacity	kW	37	45	55	75	90	110	132	160	200
	Motor Rotation Speed	min^-1	1750	1750	1750	1750	1750	1750	1750	1750	1750
E5-02	PM Motor Rated Power	kW	37.00	45.00	55.00	75.00	90.00	110.00	132.00	160.00	200.00
E5-03	PM Motor Rated Current (FLA)	A	68.3	78.2	96.2	131.0	159.0	185.0	227.0	269.0	343.0
E5-04	PM Motor Pole Count	-	12	12	12	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	0.072	0.036	0.026	0.022	0.017	0.019	0.010	0.006	0.004
E5-06	PM d-axis Inductance (mH/phase)	mH	1.56	1.09	0.78	0.72	0.68	0.47	0.38	0.59	0.43
E5-07	PM q-axis Inductance (mH/phase)	mH	1.76	1.57	1.21	1.04	0.87	0.68	0.55	0.89	0.72
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	230.0	268.7	248.3	238.3	244.8	246.2	250.0	382.9	338.6
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	175.0	175.0	175.0	175.0	175.0	175.0	175.0	175.0	175.0
E1-05	Maximum Output Voltage	V	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0
E1-06	Base Frequency	Hz	175.0	175.0	175.0	175.0	175.0	175.0	175.0	116.7	116.7
E1-09	Minimum Output Frequency	Hz	8.8	8.8	8.8	8.8	8.8	8.8	8.8	5.8	5.8
C5-17	Motor Inertia	kgm²	0.067	0.210	0.25	0.30	0.34	0.44	0.52	1.14	1.53
L3-24	Motor Accel Time @ Rated Torque	s	0.061	0.157	0.155	0.136	0.128	0.134	0.132	0.239	0.257
n5-02	Motor Inertia Acceleration Time	s	0.061	0.157	0.155	0.136	0.128	0.134	0.132	0.239	0.257
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	290.0	290.0	290.0	290.0	300.0	300.0	300.0	300.0	300.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	408	399	421	360	354	390	393	205	200
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	204	199	210	180	177	195	196	102	100
n8-57	HFI Overlap Selection	-	1	1	1	1	1	1	1	1	1
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150	150	150

Table 5. EST2 Series Motor Code Setting for Specification of 200 V at 1450 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	5305	5306	5308	530A	530B	530D	530E	530F
	Voltage Class	V	200	200	200	200	200	200	200	200
	Capacity	kW	1.5	2.2	3.7	5.5	7.5	11	15	18.5
	Motor Rotation Speed	min^-1	1450	1450	1450	1450	1450	1450	1450	1450
E5-02	PM Motor Rated Power	kW	1.50	2.20	3.70	5.50	7.50	11.00	15.00	18.50
E5-03	PM Motor Rated Current (FLA)	A	6.00	9.36	16.20	22.00	27.20	41.5	56.6	65.0
E5-04	PM Motor Pole Count	-	12	12	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	0.536	0.194	0.102	0.110	0.153	0.090	0.062	0.046
E5-06	PM d-axis Inductance (mH/phase)	mH	3.15	1.63	1.03	1.08	1.59	1.38	1.11	0.87
E5-07	PM q-axis Inductance (mH/phase)	mH	4.29	2.48	1.53	1.64	2.28	1.79	1.34	1.08
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	126.0	120.02	115.2	128.4	134.2	131.6	133.7	137.8
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	145.0	145.0	145.0	145.0	145.0	145.0	145.0	145.0
E1-05	Maximum Output Voltage	V	190.0	190.0	190.0	190.0	190.0	190.0	190.0	190.0
E1-06	Base Frequency	Hz	145.0	145.0	145.0	145.0	145.0	145.0	145.0	145.0
E1-09	Minimum Output Frequency	Hz	7.3	7.3	7.3	7.3	7.3	7.3	7.3	7.3
C5-17	Motor Inertia	kgm²	0.0067	0.0084	0.012	0.014	0.012	0.031	0.038	0.044
L3-24	Motor Accel Time @ Rated Torque	s	0.102	0.088	0.075	0.057	0.038	0.065	0.058	0.055
n5-02	Motor Inertia Acceleration Time	s	0.102	0.088	0.075	0.057	0.038	0.065	0.058	0.055
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	260.0	260.0	260.0	260.0	260.0	290.0	290.0	290.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	952	980	980	679	395	330	323	349
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	476	490	490	339	197	165	161	174
n8-57	HFI Overlap Selection	-	1	1	1	1	1	1	1	1
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150	150

Table 6. EST2 Series Motor Code Setting for Specification of 200 V at 1450 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	5310	5312	5313	5314	5315	5316	5317
	Voltage Class	V	200	200	200	200	200	200	200
	Capacity	kW	22	30	37	45	55	75	90
	Motor Rotation Speed	min^-1	1450	1450	1450	1450	1450	1450	1450
E5-02	PM Motor Rated Power	kW	22.00	30.00	37.00	45.00	55.00	75.00	90.00
E5-03	PM Motor Rated Current (FLA)	A	78.9	111.0	133.0	157.0	184.0	255.0	318.0
E5-04	PM Motor Pole Count	-	12	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	0.030	0.024	0.012	0.009	0.009	0.007	0.004
E5-06	PM d-axis Inductance (mH/phase)	mH	0.56	0.45	0.36	0.26	0.26	0.22	0.17
E5-07	PM q-axis Inductance (mH/phase)	mH	0.76	0.56	0.53	0.41	0.41	0.34	0.23
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	138.3	135.3	139.1	144.5	133.5	157.0	136.3
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	145.0	145.0	145.0	145.0	145.0	145.0	145.0
E1-05	Maximum Output Voltage	V	190.0	190.0	190.0	190.0	190.0	190.0	190.0
E1-06	Base Frequency	Hz	145.0	145.0	145.0	145.0	145.0	145.0	145.0
E1-09	Minimum Output Frequency	Hz	7.3	7.3	7.3	7.3	7.3	7.3	7.3
C5-17	Motor Inertia	kgm²	0.060	0.067	0.210	0.253	0.30	0.34	0.44
L3-24	Motor Accel Time @ Rated Torque	s	0.063	0.052	0.131	0.130	0.127	0.105	0.113
n5-02	Motor Inertia Acceleration Time	s	0.063	0.052	0.131	0.130	0.127	0.105	0.113
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	290.0	290.0	300.0	300.0	300.0	300.0	300.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	409	394	348	381	325	283	335
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	204	197	174	190	162	141	167
n8-57	HFI Overlap Selection	-	1	1	1	1	1	1	1
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150

Table 7. EST2 Series Motor Code Setting for Specification of 400 V at 1450 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	5335	5336	5338	533A	533B	533D	533E	533F	5340
	Voltage Class	V	400	400	400	400	400	400	400	400	400
	Capacity	kW	1.5	2.2	3.7	5.5	7.5	11	15	18.5	22
	Motor Rotation Speed	min^-1	1450	1450	1450	1450	1450	1450	1450	1450	1450
E5-02	PM Motor Rated Power	kW	1.50	2.20	3.70	5.50	7.50	11.00	15.00	18.50	22.00
E5-03	PM Motor Rated Current (FLA)	A	3.00	4.68	8.01	11.00	13.60	20.8	28.3	32.5	39.5
E5-04	PM Motor Pole Count	-	12	12	12	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	2.144	0.776	0.408	0.440	0.612	0.360	0.248	0.184	0.120
E5-06	PM d-axis Inductance (mH/phase)	mH	12.60	6.52	4.12	4.32	6.36	5.52	4.45	3.48	2.24
E5-07	PM q-axis Inductance (mH/phase)	mH	17.16	9.92	6.12	6.56	9.12	7.16	5.36	4.32	3.04
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	252.0	240.4	230.4	256.8	268.4	263.2	267.4	275.6	276.6
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	145.0	145.0	145.0	145.0	145.0	145.0	145.0	145.0	145.0
E1-05	Maximum Output Voltage	V	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0
E1-06	Base Frequency	Hz	145.0	145.0	145.0	145.0	145.0	145.0	145.0	145.0	145.0
E1-09	Minimum Output Frequency	Hz	7.3	7.3	7.3	7.3	7.3	7.3	7.3	7.3	7.3
C5-17	Motor Inertia	kgm²	0.0067	0.0084	0.0120	0.014	0.012	0.031	0.038	0.044	0.060
L3-24	Motor Accel Time @ Rated Torque	s	0.102	0.088	0.075	0.057	0.038	0.065	0.058	0.055	0.063
n5-02	Motor Inertia Acceleration Time	s	0.102	0.088	0.075	0.057	0.038	0.065	0.058	0.055	0.063
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	260.0	260.0	260.0	260.0	260.0	290.0	290.0	290.0	290.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	952	980	980	679	395	329	323	349	408
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	476	490	490	339	197	164	161	174	204
n8-57	HFI Overlap Selection	-	1	1	1	1	1	1	1	1	1
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150	150	150

Table 8. EST2 Series Motor Code Setting for Specification of 400 V at 1450 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	5342	5343	5344	5345	5346	5347	5349	534A	534D
	Voltage Class	V	400	400	400	400	400	400	400	400	400
	Capacity	kW	30	37	45	55	75	90	132	160	250
	Motor Rotation Speed	min^-1	1450	1450	1450	1450	1450	1450	1450	1450	1450
E5-02	PM Motor Rated Power	kW	30.00	37.00	45.00	55.00	75.00	90.00	132.00	160.00	250.00
E5-03	PM Motor Rated Current (FLA)	A	55.5	66.5	78.5	95.2	128.0	149.0	227.0	266.0	435.0
E5-04	PM Motor Pole Count	-	12	12	12	12	12	12	8	8	8
E5-05	PM Motor Resistance (ohms/phase)	Ω	0.096	0.048	0.036	0.029	0.028	0.020	0.008	0.006	0.003
E5-06	PM d-axis Inductance (mH/phase)	mH	1.80	1.44	1.04	0.87	0.88	0.70	0.75	0.63	0.49
E5-07	PM q-axis Inductance (mH/phase)	mH	2.24	2.12	1.64	1.37	1.36	1.10	1.24	0.99	0.61
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	270.6	278.2	289.0	255.4	314.0	283.8	391.8	455.1	390.3
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	145.0	145.0	145.0	145.0	145.0	145.0	145.0	145.0	145.0
E1-05	Maximum Output Voltage	V	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0
E1-06	Base Frequency	Hz	145.0	145.0	145.0	145.0	145.0	145.0	96.7	96.7	96.7
E1-09	Minimum Output Frequency	Hz	7.3	7.3	7.3	7.3	7.3	7.3	4.8	4.8	4.8
C5-17	Motor Inertia	kgm²	0.067	0.210	0.253	0.30	0.34	0.44	1.14	1.53	2.15
L3-24	Motor Accel Time @ Rated Torque	s	0.052	0.131	0.130	0.127	0.105	0.113	0.199	0.221	0.198
n5-02	Motor Inertia Acceleration Time	s	0.052	0.131	0.130	0.127	0.105	0.113	0.199	0.221	0.198
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	290.0	300.0	300.0	300.0	300.0	300.0	300.0	300.0	300.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	394	348	381	376	282	299	200	200	200
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	197	174	190	188	141	149	100	100	100
n8-57	HFI Overlap Selection	-	1	1	1	1	1	1	1	1	1
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150	150	150

Table 9. EST2 Series Motor Code Setting for Specification of 200 V at 1150 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	5403	5405	5406	5408	540A	540B	540D	540E
	Voltage Class	V	200	200	200	200	200	200	200	200
	Capacity	kW	0.75	1.5	2.2	3.7	5.5	7.5	11	15
	Motor Rotation Speed	min^-1	1150	1150	1150	1150	1150	1150	1150	1150
E5-02	PM Motor Rated Power	kW	0.75	1.50	2.20	3.70	5.50	7.50	11.00	15.00
E5-03	PM Motor Rated Current (FLA)	A	3.30	6.40	9.36	15.30	20.40	27.80	40.5	54.4
E5-04	PM Motor Pole Count	-	12	12	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	0.755	0.375	0.173	0.167	0.232	0.157	0.093	0.069
E5-06	PM d-axis Inductance (mH/phase)	mH	3.95	2.72	1.74	1.61	2.36	2.45	1.68	1.30
E5-07	PM q-axis Inductance (mH/phase)	mH	6.47	3.74	2.60	2.43	3.79	3.10	2.06	1.78
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	147.9	146.9	149.6	153.3	167.4	164.9	167.4	175.9
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	115.0	115.0	115.0	115.0	115.0	115.0	115.0	115.0
E1-05	Maximum Output Voltage	V	190.0	190.0	190.0	190.0	190.0	190.0	190.0	190.0
E1-06	Base Frequency	Hz	115.0	115.0	115.0	115.0	115.0	115.0	115.0	115.0
E1-09	Minimum Output Frequency	Hz	5.8	5.8	5.8	5.8	5.8	5.8	5.8	5.8
C5-17	Motor Inertia	kgm²	0.0067	0.0084	0.0120	0.0136	0.012	0.031	0.038	0.044
L3-24	Motor Accel Time @ Rated Torque	s	0.129	0.081	0.079	0.053	0.032	0.060	0.050	0.043
n5-02	Motor Inertia Acceleration Time	s	0.129	0.081	0.079	0.053	0.032	0.060	0.050	0.043
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	260.0	260.0	260.0	260.0	260.0	290.0	290.0	290.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	980	980	980	659	317	284	294	253
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	490	490	490	329	158	142	147	126
n8-57	HFI Overlap Selection	-	1	1	1	1	1	1	1	1
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150	150

Table 10. EST2 Series Motor Code Setting for Specification of 200 V at 1150 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	540F	5410	5412	5413	5414	5415	5416	5417
	Voltage Class	V	200	200	200	200	200	200	200	200
	Capacity	kW	18.5	22	30	37	45	55	75	90
	Motor Rotation Speed	min^-1	1150	1150	1150	1150	1150	1150	1150	1150
E5-02	PM Motor Rated Power	kW	18.50	22.00	30.00	37.00	45.00	55.00	75.00	90.00
E5-03	PM Motor Rated Current (FLA)	A	68.0	79.7	105.0	135.0	163.0	183.0	260.0	302.0
E5-04	PM Motor Pole Count	-	12	12	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	0.044	0.039	0.020	0.014	0.011	0.001	0.008	0.007
E5-06	PM d-axis Inductance (mH/phase)	mH	0.86	0.87	0.50	0.45	0.31	0.41	0.31	0.25
E5-07	PM q-axis Inductance (mH/phase)	mH	1.12	1.04	0.79	0.65	0.49	0.57	0.41	0.40
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	168.1	173.6	180.4	194.7	173.2	200.8	202.4	175.7
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	115.0	115.0	115.0	115.0	115.0	115.0	115.0	115.0
E1-05	Maximum Output Voltage	V	190.0	190.0	190.0	190.0	190.0	190.0	190.0	190.0
E1-06	Base Frequency	Hz	115.0	115.0	115.0	115.0	115.0	115.0	115.0	115.0
E1-09	Minimum Output Frequency	Hz	5.8	5.8	5.8	5.8	5.8	5.8	5.8	5.8
C5-17	Motor Inertia	kgm²	0.060	0.067	0.210	0.253	0.303	0.34	0.44	0.52
L3-24	Motor Accel Time @ Rated Torque	s	0.047	0.044	0.102	0.099	0.098	0.090	0.085	0.083
n5-02	Motor Inertia Acceleration Time	s	0.047	0.044	0.102	0.099	0.098	0.090	0.085	0.083
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	290.0	290.0	300.0	300.0	300.0	300.0	300.0	300.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	322	296	295	279	307	235	230	203
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	161	148	147	139	153	117	115	101
n8-57	HFI Overlap Selection	-	1	1	1	1	1	1	1	1
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150	150

Table 11. EST2 Series Motor Code Setting for Specification of 400 V at 1150 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	5433	5435	5436	5438	543A	543B	543D	543E	543F	5440
	Voltage Class	V	400	400	400	400	400	400	400	400	400	400
	Capacity	kW	0.75	1.5	2.2	3.7	5.5	7.5	11	15	18.5	22
	Motor Rotation Speed	min^-1	1150	1150	1150	1150	1150	1150	1150	1150	1150	1150
E5-02	PM Motor Rated Power	kW	0.75	1.50	2.20	3.70	5.50	7.50	11.00	15.00	18.50	22.00
E5-03	PM Motor Rated Current (FLA)	A	1.65	3.20	4.68	7.65	10.20	13.90	20.3	27.2	34.0	39.9
E5-04	PM Motor Pole Count	-	12	12	12	7.6512	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	3.020	1.500	0.692	0.666	0.928	0.628	0.372	0.275	0.176	0.156
E5-06	PM d-axis Inductance (mH/phase)	mH	15.80	10.88	6.96	6.44	9.44	9.80	6.72	5.20	3.44	3.48
E5-07	PM q-axis Inductance (mH/phase)	mH	25.88	14.96	10.40	9.72	15.16	12.40	8.24	7.12	4.48	4.16
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	295.8	293.8	299.2	306.6	334.8	329.8	334.8	351.8	336.2	347.2
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	115.0	115.0	115.0	115.0	115.0	115.0	115.0	115.0	115.0	115.0
E1-05	Maximum Output Voltage	V	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0
E1-06	Base Frequency	Hz	115.0	115.0	115.0	115.0	115.0	115.0	115.0	115.0	115.0	115.0
E1-09	Minimum Output Frequency	Hz	5.8	5.8	5.8	5.8	5.8	5.8	5.8	5.8	5.8	5.8
C5-17	Motor Inertia	kgm²	0.0067	0.0084	0.0120	0.0136	0.012	0.031	0.038	0.044	0.060	0.067
L3-24	Motor Accel Time @ Rated Torque	s	0.129	0.081	0.079	0.053	0.032	0.060	0.050	0.043	0.047	0.044
n5-02	Motor Inertia Acceleration Time	s	0.129	0.081	0.079	0.053	0.032	0.060	0.050	0.043	0.047	0.044
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	260.0	260.0	260.0	260.0	260.0	290.0	290.0	290.0	290.0	290.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	980	980	980	659	317	284	293	253	322	295
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	490	490	490	329	158	142	146	126	161	147
n8-57	HFI Overlap Selection	-	1	1	1	1	1	1	1	1	1	1
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150	150	150	150

Table 12. EST2 Series Motor Code Setting for Specification of 400 V at 1150 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	5442	5443	5444	5445	5446	5447	5448	5449	544A	544C
	Voltage Class	V	400	400	400	400	400	400	400	400	400	400
	Capacity	kW	30	37	45	55	75	90	110	132	160	200
	Motor Rotation Speed	min^-1	1150	1150	1150	1150	1150	1150	1150	1150	1150	1150
E5-02	PM Motor Rated Power	kW	30.00	37.00	45.00	55.00	75.00	90.00	110.00	132.00	160.00	200.00
E5-03	PM Motor Rated Current (FLA)	A	52.5	65.6	79.3	90.5	127.0	153.0	182.0	216.0	260.0	331.0
E5-04	PM Motor Pole Count	-	12	12	12	7.6512	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	0.080	0.056	0.046	0.004	0.033	0.024	0.014	0.010	0.088	0.006
E5-06	PM d-axis Inductance (mH/phase)	mH	2.00	1.55	1.56	1.64	1.32	0.94	1.18	1.10	0.90	0.77
E5-07	PM q-axis Inductance (mH/phase)	mH	3.16	2.46	2.16	2.28	1.76	1.34	2.05	1.86	1.43	1.16
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	360.8	350.6	367.2	446.2	403.1	382.7	524.8	570.0	608.7	603.5
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	115.0	115.0	115.0	115.0	115.0	115.0	76.7	76.7	76.7	76.7
E1-05	Maximum Output Voltage	V	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0
E1-06	Base Frequency	Hz	115.0	115.0	115.0	115.0	115.0	115.0	76.7	76.7	76.7	76.7
E1-09	Minimum Output Frequency	Hz	5.8	5.8	5.8	5.8	5.8	5.8	3.8	3.8	3.8	3.8
C5-17	Motor Inertia	kgm²	0.210	0.253	0.303	0.34	0.44	0.52	1.14	1.53	1.83	2.15
L3-24	Motor Accel Time @ Rated Torque	s	0.102	0.099	0.098	0.090	0.085	0.083	0.150	0.168	0.166	0.156
n5-02	Motor Inertia Acceleration Time	s	0.102	0.099	0.098	0.090	0.085	0.083	0.150	0.168	0.166	0.156
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	300.0	300.0	300.0	300.0	300.0	300.0	300.0	300.0	300.0	300.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	295	304	286	238	219	239	200	200	200	200
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	147	152	143	119	109	119	100	100	100	100
n8-57	HFI Overlap Selection	-	1	1	1	1	1	1	1	1	1	1
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150	150	150	150

Table 13. EST4 Series Motor Code Setting for Specification of 200 V at 1750 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	6206	6208	620A	620B	620D	620E	620F	6210
	Voltage Class	V	200	200	200	200	200	200	200	200
	Capacity	kW	2.2	3.7	5.5	7.5	11	15	18.5	22
	Motor Rotation Speed	min^-1	1750	1750	1750	1750	1750	1750	1750	1750
E5-02	PM Motor Rated Power	kW	2.20	3.70	5.50	7.50	11.00	15.00	18.50	22.00
E5-03	PM Motor Rated Current (FLA)	A	9.49	16.10	22.30	30.00	41.2	56.6	69.6	80.8
E5-04	PM Motor Pole Count	-	12	12	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	0.213	0.141	0.083	0.076	0.102	0.063	0.041	0.032
E5-06	PM d-axis Inductance (mH/phase)	mH	1.60	1.20	0.80	0.75	0.95	0.94	0.76	0.62
E5-07	PM q-axis Inductance (mH/phase)	mH	2.18	1.63	1.20	1.14	1.17	1.24	0.90	0.75
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	106.6	107.3	114.0	119.1	122.2	121.7	122.2	126.4
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	175.0	175.0	175.0	175.0	175.0	175.0	175.0	175.0
E1-05	Maximum Output Voltage	V	190.0	190.0	190.0	190.0	190.0	190.0	190.0	190.0
E1-06	Base Frequency	Hz	175.0	175.0	175.0	175.0	175.0	175.0	175.0	175.0
E1-09	Minimum Output Frequency	Hz	8.8	8.8	8.8	8.8	8.8	8.8	8.8	8.8
C5-17	Motor Inertia	kgm²	0.0067	0.0084	0.012	0.014	0.012	0.031	0.038	0.044
L3-24	Motor Accel Time @ Rated Torque	s	0.102	0.076	0.073	0.061	0.037	0.069	0.068	0.067
n5-02	Motor Inertia Acceleration Time	s	0.102	0.076	0.073	0.061	0.037	0.069	0.068	0.067
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	260.0	260.0	260.0	260.0	260.0	290.0	290.0	290.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	980	934	916	716	490	349	391	404
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	490	467	458	358	245	174	195	202
n8-57	HFI Overlap Selection	-	0	0	0	0	0	0	0	0
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150	150

Table 14. EST4 Series Motor Code Setting for Specification of 200 V at 1750 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	6212	6213	6214	6215	6216	6217	6218
	Voltage Class	V	200	200	200	200	200	200	200
	Capacity	kW	30	37	45	55	75	90	110
	Motor Rotation Speed	min^-1	1750	1750	1750	1750	1750	1750	1750
E5-02	PM Motor Rated Power	kW	30.00	37.00	45.00	55.00	75.00	90.00	110.00
E5-03	PM Motor Rated Current (FLA)	A	110.0	137.0	150.0	189.0	252.0	313.0	366.0
E5-04	PM Motor Pole Count	-	12	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	0.020	0.018	0.010	0.008	0.007	0.005	0.004
E5-06	PM d-axis Inductance (mH/phase)	mH	0.43	0.39	0.31	0.24	0.25	0.11	0.14
E5-07	PM q-axis Inductance (mH/phase)	mH	0.52	0.44	0.44	0.34	0.30	0.21	0.23
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	126.1	127.8	144.6	143.4	153.2	149.5	159.6
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	175.0	175.0	175.0	175.0	175.0	175.0	175.0
E1-05	Maximum Output Voltage	V	190.0	190.0	190.0	190.0	190.0	190.0	190.0
E1-06	Base Frequency	Hz	175.0	175.0	175.0	175.0	175.0	175.0	175.0
E1-09	Minimum Output Frequency	Hz	8.8	8.8	8.8	8.8	8.8	8.8	8.8
C5-17	Motor Inertia	kgm²	0.060	0.067	0.210	0.25	0.30	0.34	0.44
L3-24	Motor Accel Time @ Rated Torque	s	0.068	0.061	0.157	0.155	0.136	0.128	0.134
n5-02	Motor Inertia Acceleration Time	s	0.068	0.061	0.157	0.155	0.136	0.128	0.134
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	290.0	290.0	300.0	300.0	300.0	300.0	300.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	428	406	371	381	335	373	291
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	214	203	185	190	167	186	145
n8-57	HFI Overlap Selection	-	0	0	0	0	0	0	0
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150

Table 15. EST4 Series Motor Code Setting for Specification of 400 V at 1750 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	6236	6238	623A	623B	623D	623E	623F	6240	6242	6243
	Voltage Class	V	400	400	400	400	400	400	400	400	400	400
	Capacity	kW	2.2	3.7	5.5	7.5	11	15	18.5	22	30	37
	Motor Rotation Speed	min^-1	1750	1750	1750	1750	1750	1750	1750	1750	1750	1750
E5-02	PM Motor Rated Power	kW	2.20	3.70	5.50	7.50	11.00	15.00	18.50	22.00	30.00	37.00
E5-03	PM Motor Rated Current (FLA)	A	4.72	8.05	11.20	15.00	20.6	28.3	34.8	40.4	54.7	68.4
E5-04	PM Motor Pole Count	-	12	12	12	12	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	0.852	0.564	0.334	0.304	0.408	0.252	0.164	0.127	0.080	0.072
E5-06	PM d-axis Inductance (mH/phase)	mH	6.40	4.80	3.20	3.00	3.80	3.76	3.04	2.48	1.72	1.56
E5-07	PM q-axis Inductance (mH/phase)	mH	8.72	6.52	4.80	4.56	4.68	4.96	3.60	3.00	2.08	1.76
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	213.2	214.6	228.0	238.2	244.4	243.4	244.4	252.8	252.2	255.6
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	175.0	175.0	175.0	175.0	175.0	175.0	175.0	175.0	175.0	175.0
E1-05	Maximum Output Voltage	V	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0
E1-06	Base Frequency	Hz	175.0	175.0	175.0	175.0	175.0	175.0	175.0	175.0	175.0	175.0
E1-09	Minimum Output Frequency	Hz	8.8	8.8	8.8	8.8	8.8	8.8	8.8	8.8	8.8	8.8
C5-17	Motor Inertia	kgm²	0.0067	0.0084	0.012	0.014	0.012	0.031	0.038	0.044	0.060	0.067
L3-24	Motor Accel Time @ Rated Torque	s	0.102	0.076	0.073	0.061	0.037	0.069	0.068	0.067	0.068	0.0681
n5-02	Motor Inertia Acceleration Time	s	0.102	0.076	0.073	0.061	0.037	0.069	0.068	0.067	0.068	0.061
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	260.0	260.0	260.0	260.0	260.0	290.0	290.0	290.0	290.0	290.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	980	934	912	716	490	349	391	404	431	407
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	490	467	456	358	245	174	195	202	215	203
n8-57	HFI Overlap Selection	-	0	0	0	0	0	0	0	0	0	0
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150	150	150	150

Table 16. EST4 Series Motor Code Setting for Specification of 400 V at 1750 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	6244	6245	6246	6247	6248	6249	624A	624C	624D	624E
	Voltage Class	V	400	400	400	400	400	400	400	400	400	400
	Capacity	kW	45	55	75	90	110	132	160	200	250	300
	Motor Rotation Speed	min^-1	1750	1750	1750	1750	1750	1750	1750	1750	1750	1750
E5-02	PM Motor Rated Power	kW	45.00	55.00	75.00	90.00	110.00	132.00	160.00	200.00	250.00	300.00
E5-03	PM Motor Rated Current (FLA)	A	77.9	95.0	130.0	159.0	178.0	227.0	271.0	344.0	433.0	511.0
E5-04	PM Motor Pole Count	-	12	12	12	12	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	0.036	0.026	0.022	0.017	0.014	0.010	0.006	0.004	0.003	0.003
E5-06	PM d-axis Inductance (mH/phase)	mH	1.09	0.78	0.72	0.68	0.47	0.38	0.59	0.43	0.34	0.30
E5-07	PM q-axis Inductance (mH/phase)	mH	1.57	1.21	1.04	0.87	0.68	0.55	0.89	0.72	0.56	0.42
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	268.7	275.9	280.4	272.1	298.3	277.7	424.0	420.0	406.8	426.1
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	175.0	175.0	175.0	175.0	175.0	175.0	116.7	175.0	175.0	175.0
E1-05	Maximum Output Voltage	V	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0
E1-06	Base Frequency	Hz	175.0	175.0	175.0	175.0	175.0	175.0	116.7	116.7	116.7	116.7
E1-09	Minimum Output Frequency	Hz	8.8	8.8	8.8	8.8	8.8	8.8	8.8	5.8	5.8	5.8
C5-17	Motor Inertia	kgm²	0.210	0.25	0.30	0.34	0.44	0.52	1.14	1.53	1.83	2.15
L3-24	Motor Accel Time @ Rated Torque	s	0.1578	0.155	0.136	0.128	0.134	0.132	0.239	0.257	0.246	0.241
n5-02	Motor Inertia Acceleration Time	s	0.061	0.157	0.155	0.136	0.128	0.134	0.132	0.239	0.257	0.257
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	300.0	300.0	300.0	300.0	300.0	300.0	300.0	300.0	300.0	300.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	401	426	362	354	405	393	203	200	202	228
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	200	213	181	177	202	196	101	100	101	114
n8-57	HFI Overlap Selection	-	0	0	0	0	0	0	0	0	0	0
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150	150	150	150

Table 17. EST4 Series Motor Code Setting for Specification of 200 V at 1450 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	6305	6306	6308	630A	630B	630D	630E	630F
	Voltage Class	V	200	200	200	200	200	200	200	200
	Capacity	kW	1.5	2.2	3.7	5.5	7.5	11	15	18.5
	Motor Rotation Speed	min^-1	1450	1450	1450	1450	1450	1450	1450	1450
E5-02	PM Motor Rated Power	kW	1.50	2.20	3.70	5.50	7.50	11.00	15.00	18.50
E5-03	PM Motor Rated Current (FLA)	A	6.00	9.36	16.00	21.80	27.80	40.2	56.6	68.6
E5-04	PM Motor Pole Count	-	12	12	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	0.536	0.194	0.102	0.110	0.153	0.090	0.062	0.046
E5-06	PM d-axis Inductance (mH/phase)	mH	3.15	1.63	1.03	1.08	1.59	1.38	1.11	0.87
E5-07	PM q-axis Inductance (mH/phase)	mH	4.29	2.48	1.53	1.64	2.28	1.79	1.34	1.08
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	140.0	133.5	128.0	142.7	149.1	146.2	148.6	153.1
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	145.0	145.0	145.0	145.0	145.0	145.0	145.0	145.0
E1-05	Maximum Output Voltage	V	190.0	190.0	190.0	190.0	190.0	190.0	190.0	190.0
E1-06	Base Frequency	Hz	145.0	145.0	145.0	145.0	145.0	145.0	145.0	145.0
E1-09	Minimum Output Frequency	Hz	7.3	7.3	7.3	7.3	7.3	7.3	7.3	7.3
C5-17	Motor Inertia	kgm²	0.0067	0.0084	0.012	0.014	0.012	0.031	0.038	0.044
L3-24	Motor Accel Time @ Rated Torque	s	0.102	0.088	0.075	0.057	0.038	0.065	0.058	0.055
n5-02	Motor Inertia Acceleration Time	s	0.102	0.088	0.075	0.057	0.038	0.065	0.058	0.055
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	260.0	260.0	260.0	260.0	260.0	290.0	290.0	290.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	952	980	980	685	387	341	323	331
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	476	490	490	342	193	170	161	165
n8-57	HFI Overlap Selection	-	0	0	0	0	0	0	0	0
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150	150

Table 18. EST4 Series Motor Code Setting for Specification of 200 V at 1450 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	6310	6312	6313	6314	6315	6316	6317	6318
	Voltage Class	V	200	200	200	200	200	200	200	200
	Capacity	kW	22	30	37	45	55	75	90	110
	Motor Rotation Speed	min^-1	1450	1450	1450	1450	1450	1450	1450	1450
E5-02	PM Motor Rated Power	kW	22.00	30.00	37.00	45.00	55.00	75.00	90.00	110.00
E5-03	PM Motor Rated Current (FLA)	A	78.4	110.0	131.0	157.0	182.0	249.0	321.0	356.0
E5-04	PM Motor Pole Count	-	12	12	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	0.030	0.024	0.012	0.009	0.009	0.007	0.004	0.005
E5-06	PM d-axis Inductance (mH/phase)	mH	0.56	0.45	0.36	0.26	0.26	0.22	0.17	0.19
E5-07	PM q-axis Inductance (mH/phase)	mH	0.76	0.56	0.53	0.41	0.41	0.34	0.23	0.28
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	153.7	150.3	156.6	160.5	133.5	175.3	160.3	196.8
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	145.0	145.0	145.0	145.0	145.0	145.0	145.0	145.0
E1-05	Maximum Output Voltage	V	190.0	190.0	190.0	190.0	190.0	190.0	190.0	190.0
E1-06	Base Frequency	Hz	145.0	145.0	145.0	145.0	145.0	145.0	145.0	145.0
E1-09	Minimum Output Frequency	Hz	7.3	7.3	7.3	7.3	7.3	7.3	7.3	7.3
C5-17	Motor Inertia	kgm²	0.060	0.067	0.210	0.253	0.30	0.34	0.44	0.52
L3-24	Motor Accel Time @ Rated Torque	s	0.063	0.052	0.131	0.130	0.127	0.105	0.113	0.108
n5-02	Motor Inertia Acceleration Time	s	0.063	0.052	0.131	0.130	0.127	0.105	0.113	0.108
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	290.0	290.0	300.0	300.0	300.0	300.0	300.0	300.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	411	398	353	381	328	289	332	246
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	205	199	176	190	164	144	166	123
n8-57	HFI Overlap Selection	-	0	0	0	0	0	0	0	0
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150	150

Table 19. EST4 Series Motor Code Setting for Specification of 400 V at 1450 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	6335	6336	6338	633A	633B	633D	633E	633F	6340	6342
	Voltage Class	V	400	400	400	400	400	400	400	400	400	400
	Capacity	kW	1.5	2.2	3.7	5.5	7.5	11	15	18.5	22	30
	Motor Rotation Speed	min^-1	1450	1450	1450	1450	1450	1450	1450	1450	1450	1450
E5-02	PM Motor Rated Power	kW	1.50	2.20	3.70	5.50	7.50	11.00	15.00	18.50	22.00	30.00
E5-03	PM Motor Rated Current (FLA)	A	3.00	4.68	8.00	10.90	13.90	20.1	28.3	34.3	39.2	54.8
E5-04	PM Motor Pole Count	-	12	12	12	12	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	2.144	0.776	0.408	0.440	0.612	0.360	0.248	0.184	0.120	0.096
E5-06	PM d-axis Inductance (mH/phase)	mH	12.60	6.52	4.12	4.32	6.36	5.52	4.45	3.48	2.24	2.24
E5-07	PM q-axis Inductance (mH/phase)	mH	17.16	9.92	6.12	6.56	9.12	7.16	5.36	4.32	3.04	2.24
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	280.0	267.0	256.0	285.4	298.2	292.4	297.2	306.2	307.4	300.6
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	145.0	145.0	145.0	145.0	145.0	145.0	145.0	145.0	145.0	145.0
E1-05	Maximum Output Voltage	V	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0
E1-06	Base Frequency	Hz	145.0	145.0	145.0	145.0	145.0	145.0	145.0	145.0	145.0	145.0
E1-09	Minimum Output Frequency	Hz	7.3	7.3	7.3	7.3	7.3	7.3	7.3	7.3	7.3	7.3
C5-17	Motor Inertia	kgm²	0.0067	0.0084	0.0120	0.014	0.012	0.031	0.038	0.044	0.060	0.067
L3-24	Motor Accel Time @ Rated Torque	s	0.102	0.088	0.075	0.057	0.038	0.065	0.058	0.055	0.063	0.052
n5-02	Motor Inertia Acceleration Time	s	0.102	0.088	0.075	0.057	0.038	0.065	0.058	0.055	0.063	0.063
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	260.0	260.0	260.0	260.0	260.0	290.0	290.0	290.0	290.0	290.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	952	980	980	685	387	341	323	331	411	399
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	476	490	490	342	193	170	161	165	205	199
n8-57	HFI Overlap Selection	-	0	0	0	0	0	0	0	0	0	0
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150	150	150	150

Table 20. EST4 Series Motor Code Setting for Specification of 400 V at 1450 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	6343	6344	6345	6346	6347	6348	6349	634A	634C	634D
	Voltage Class	V	400	400	400	400	400	400	400	400	400	400
	Capacity	kW	37	45	55	75	90	110	132	160	200	250
	Motor Rotation Speed	min^-1	1450	1450	1450	1450	1450	1450	1450	1450	1450	1450
E5-02	PM Motor Rated Power	kW	37.00	45.00	55.00	75.00	90.00	110.00	132.00	160.00	200.00	250.00
E5-03	PM Motor Rated Current (FLA)	A	65.3	78.5	95.2	125.0	147.0	187.0	227.0	266.0	328.0	435.0
E5-04	PM Motor Pole Count	-	12	12	12	12	12	12	8	8	8	8
E5-05	PM Motor Resistance (ohms/phase)	Ω	0.048	0.035	0.029	0.028	0.020	0.017	0.008	0.006	0.005	0.003
E5-06	PM d-axis Inductance (mH/phase)	mH	1.44	1.04	0.87	0.88	0.70	0.67	0.75	0.63	0.71	0.39
E5-07	PM q-axis Inductance (mH/phase)	mH	2.12	1.66	1.37	1.36	1.10	0.92	1.24	0.99	1.00	0.71
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	307.6	318.0	319.3	350.6	354.8	351.3	489.8	500.6	569.6	487.9
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	145.0	145.0	145.0	145.0	145.0	145.0	96.7	96.7	96.7	96.7
E1-05	Maximum Output Voltage	V	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0
E1-06	Base Frequency	Hz	145.0	145.0	145.0	145.0	145.0	145.0	96.7	96.7	96.7	96.7
E1-09	Minimum Output Frequency	Hz	7.3	7.3	7.3	7.3	7.3	7.3	4.8	4.8	4.8	4.8
C5-17	Motor Inertia	kgm²	0.210	0.253	0.30	0.34	0.44	0.52	1.14	1.53	1.83	2.15
L3-24	Motor Accel Time @ Rated Torque	s	0.131	0.130	0.127	0.105	0.113	0.108	0.199	0.221	0.211	0.198
n5-02	Motor Inertia Acceleration Time	s	0.131	0.130	0.127	0.105	0.113	0.108	0.199	0.221	0.211	0.198
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	290.0	300.0	300.0	300.0	300.0	300.0	300.0	300.0	300.0	300.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	354	376	376	288	303	285	200	200	200	200
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	177	188	188	144	151	142	100	100	100	100
n8-57	HFI Overlap Selection	-	0	0	0	0	0	0	0	0	0	0
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150	150	150	150

Table 21. EST4 Series Motor Code Setting for Specification of 200 V at 1150 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	6403	6405	6406	6408	640A	5640B	640D	640E	640F
	Voltage Class	V	200	200	200	200	200	200	200	200	200
	Capacity	kW	0.75	1.5	2.2	3.7	5.5	7.5	11	15	18.5
	Motor Rotation Speed	min^-1	1150	1150	1150	1150	1150	1150	1150	1150	1150
E5-02	PM Motor Rated Power	kW	0.75	1.50	2.20	3.70	5.50	7.50	11.00	15.00	18.50
E5-03	PM Motor Rated Current (FLA)	A	3.30	6.40	9.36	15.30	20.90	27.80	40.8	54.2	67.8
E5-04	PM Motor Pole Count	-	12	12	12	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	0.755	0.375	0.173	0.167	0.232	0.157	0.093	0.070	0.044
E5-06	PM d-axis Inductance (mH/phase)	mH	3.95	2.72	1.74	1.61	2.36	2.45	1.68	1.30	0.86
E5-07	PM q-axis Inductance (mH/phase)	mH	6.47	3.74	2.60	2.43	3.79	3.10	2.06	1.78	1.12
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	163.4	163.2	166.2	170.3	186.0	183.2	186.0	195.4	186.8
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	115.0	115.0	115.0	115.0	115.0	115.0	115.0	115.0	115.0
E1-05	Maximum Output Voltage	V	190.0	190.0	190.0	190.0	190.0	190.0	190.0	190.0	190.0
E1-06	Base Frequency	Hz	115.0	115.0	115.0	115.0	115.0	115.0	115.0	115.0	115.0
E1-09	Minimum Output Frequency	Hz	5.8	5.8	5.8	5.8	5.8	5.8	5.8	5.8	5.8
C5-17	Motor Inertia	kgm²	0.0067	0.0084	0.0120	0.0136	0.012	0.031	0.038	0.044	0.060
L3-24	Motor Accel Time @ Rated Torque	s	0.129	0.081	0.079	0.053	0.032	0.060	0.050	0.043	0.047
n5-02	Motor Inertia Acceleration Time	s	0.129	0.081	0.079	0.053	0.032	0.060	0.050	0.043	0.047
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	260.0	260.0	260.0	260.0	260.0	290.0	290.0	290.0	290.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	980	980	980	659	309	284	292	254	323
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	490	490	490	329	154	142	146	127	161
n8-57	HFI Overlap Selection	-	0	0	0	0	0	0	0	0	0
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150	150	150

Table 22. EST4 Series Motor Code Setting for Specification of 200 V at 1150 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	6410	6412	6413	6414	6415	6416	6417	6418
	Voltage Class	V	200	200	200	200	200	200	200	200
	Capacity	kW	22	30	37	45	55	75	90	110
	Motor Rotation Speed	min^-1	1150	1150	1150	1150	1150	1150	1150	1150
E5-02	PM Motor Rated Power	kW	22.00	30.00	37.00	45.00	55.00	75.00	90.00	110.00
E5-03	PM Motor Rated Current (FLA)	A	79.1	104.0	131.0	163.0	181.0	248.0	302.0	366.0
E5-04	PM Motor Pole Count	-	12	12	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	0.039	0.020	0.014	0.011	0.001	0.008	0.007	0.004
E5-06	PM d-axis Inductance (mH/phase)	mH	0.87	0.50	0.45	0.31	0.41	0.31	0.25	0.30
E5-07	PM q-axis Inductance (mH/phase)	mH	1.04	0.79	0.65	0.49	0.57	0.44	0.40	0.51
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	192.9	200.4	194.7	192.4	223.1	222.4	234.3	327.6
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	115.0	115.0	115.0	115.0	115.0	115.0	115.0	115.0
E1-05	Maximum Output Voltage	V	190.0	190.0	190.0	190.0	190.0	190.0	190.0	190.0
E1-06	Base Frequency	Hz	115.0	115.0	115.0	115.0	115.0	115.0	115.0	76.7
E1-09	Minimum Output Frequency	Hz	5.8	5.8	5.8	5.8	5.8	5.8	5.8	3.8
C5-17	Motor Inertia	kgm²	0.067	0.210	0.253	0.303	0.34	0.44	0.52	1.14
L3-24	Motor Accel Time @ Rated Torque	s	0.044	0.102	0.099	0.098	0.090	0.085	0.083	0.150
n5-02	Motor Inertia Acceleration Time	s	0.044	0.102	0.099	0.098	0.090	0.085	0.083	0.150
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	290.0	300.0	300.0	300.0	300.0	300.0	300.0	300.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	298	298	288	307	238	225	203	200
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	149	149	144	153	119	112	101	100
n8-57	HFI Overlap Selection	-	0	0	0	0	0	0	0	0
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150	150

Table 23. EST4 Series Motor Code Setting for Specification of 400 V at 1150 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	6433	6435	6436	6438	643A	643B	643D	643E	643F	6440
	Voltage Class	V	400	400	400	400	400	400	400	400	400	400
	Capacity	kW	0.75	1.5	2.2	3.7	5.5	7.5	11	15	18.5	22
	Motor Rotation Speed	min^-1	1150	1150	1150	1150	1150	1150	1150	1150	1150	1150
E5-02	PM Motor Rated Power	kW	0.75	1.50	2.20	3.70	5.50	7.50	11.00	15.00	18.50	22.00
E5-03	PM Motor Rated Current (FLA)	A	1.65	3.20	4.68	7.65	10.40	13.90	20.4	27.1	33.9	39.5
E5-04	PM Motor Pole Count	-	12	12	12	7.6512	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	3.020	1.500	0.692	0.666	0.928	0.628	0.372	0.275	0.176	0.156
E5-06	PM d-axis Inductance (mH/phase)	mH	15.80	10.88	6.96	6.44	9.44	9.80	6.72	5.20	3.44	3.48
E5-07	PM q-axis Inductance (mH/phase)	mH	25.88	14.96	10.40	9.70	15.16	12.40	8.32	7.12	4.48	4.16
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	326.8	326.4	332.4	340.6	372.0	366.4	372.0	390.8	373.6	385.8
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	115.0	115.0	115.0	115.0	115.0	115.0	115.0	115.0	115.0	115.0
E1-05	Maximum Output Voltage	V	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0
E1-06	Base Frequency	Hz	115.0	115.0	115.0	115.0	115.0	115.0	115.0	115.0	115.0	115.0
E1-09	Minimum Output Frequency	Hz	5.8	5.8	5.8	5.8	5.8	5.8	5.8	5.8	5.8	5.8
C5-17	Motor Inertia	kgm²	0.0067	0.0084	0.0120	0.0136	0.012	0.031	0.038	0.044	0.060	0.067
L3-24	Motor Accel Time @ Rated Torque	s	0.129	0.081	0.079	0.053	0.032	0.060	0.050	0.043	0.047	0.044
n5-02	Motor Inertia Acceleration Time	s	0.129	0.081	0.079	0.053	0.032	0.060	0.050	0.043	0.047	0.044
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	260.0	260.0	260.0	260.0	260.0	290.0	290.0	290.0	290.0	290.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	980	980	980	660	311	284	289	254	323	298
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	490	490	490	330	155	142	144	127	161	149
n8-57	HFI Overlap Selection	-	0	0	0	0	0	0	0	0	0	0
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150	150	150	150

Table 24. EST4 Series Motor Code Setting for Specification of 400 V at 1150 min^-1 (r/min)
No.	Name	Unit	Motor Code (setting value of E5-01)
E5-01	PM Motor Code Selection	-	6442	6443	6444	6445	6446	6447	6448	6449	644A	644C
	Voltage Class	V	400	400	400	400	400	400	400	400	400	400
	Capacity	kW	30	37	45	55	75	90	110	132	160	200
	Motor Rotation Speed	min^-1	1150	1150	1150	1150	1150	1150	1150	1150	1150	1150
E5-02	PM Motor Rated Power	kW	30.00	37.00	45.00	55.00	75.00	90.00	110.00	132.00	160.00	200.00
E5-03	PM Motor Rated Current (FLA)	A	52.2	66.1	79.3	90.4	124.0	153.0	183.0	216.0	259.0	331.0
E5-04	PM Motor Pole Count	-	12	12	12	7.6512	12	12	12	12	12	12
E5-05	PM Motor Resistance (ohms/phase)	Ω	0.080	0.056	0.046	0.004	0.033	0.024	0.014	0.010	0.088	0.006
E5-06	PM d-axis Inductance (mH/phase)	mH	2.00	1.55	1.56	1.64	1.32	0.94	1.18	1.10	0.90	0.77
E5-07	PM q-axis Inductance (mH/phase)	mH	3.16	2.46	2.16	2.28	1.76	1.34	2.05	1.86	1.42	1.16
E5-09	PM Back-EMF Vpeak (mV/(rad/s))	mVs/rad	400.8	389.5	408.1	446.2	446.8	425.2	655.2	670.5	676.3	670.5
E5-24	PM Back-EMF L-L Vrms (mV/rpm)	mV/min^-1	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
E1-04	Maximum Output Frequency	Hz	115.0	115.0	115.0	115.0	115.0	115.0	76.7	76.7	76.7	76.7
E1-05	Maximum Output Voltage	V	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0	380.0
E1-06	Base Frequency	Hz	115.0	115.0	115.0	115.0	115.0	115.0	76.7	76.7	76.7	76.7
E1-09	Minimum Output Frequency	Hz	5.8	5.8	5.8	5.8	5.8	5.8	3.8	3.8	3.8	3.8
C5-17	Motor Inertia	kgm²	0.210	0.253	0.303	0.34	0.44	0.52	1.14	1.53	1.83	2.15
L3-24	Motor Accel Time @ Rated Torque	s	0.102	0.099	0.098	0.090	0.085	0.083	0.150	0.168	0.166	0.156
n5-02	Motor Inertia Acceleration Time	s	0.102	0.099	0.098	0.090	0.085	0.083	0.150	0.168	0.166	0.156
n8-49	Heavy Load Id Current	%	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0	0.0
b8-01	Energy Saving Control Selection	-	0	0	0	0	0	0	0	0	0	0
C5-01	ASR Proportional Gain 1	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
C5-03	ASR Proportional Gain 2	-	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
L8-27	Overcurrent Detection Gain	%	300.0	300.0	300.0	300.0	300.0	300.0	300.0	300.0	300.0	300.0
n8-35	Initial Pole Detection Method	-	1	1	1	1	1	1	1	1	1	1
n8-36	HFI Frequency Level for L Tuning	Hz	297	301	286	238	225	239	200	200	200	200
n8-37	HFI Voltage Amplitude Level	%	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
n8-39	HFI LPF Cutoff Freq	Hz	148	150	143	119	112	119	100	100	100	100
n8-57	HFI Overlap Selection	-	0	0	0	0	0	0	0	0	0	0
n8-84	Polarity Detection Current	%	150	150	150	150	150	150	150	150	150	150