Do the steps in this procedure to not show the initial start-up screen when the drive is energized.

  1. Push [F2 Key] (Home) to show the HOME screen.
    Note:

    • When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.

    • If the screen does not show [Home] for [F2 Key], push [F1 Key] (Back), and then push [F2 Key] to show [Home].

  2. Push [F2 Key] (Menu).
  3. Push [Up arrow key] / [Down arrow key] to select [Initial Setup], then push [ENTER Key].
  4. Push [Up arrow key] / [Down arrow key] to select [Show Initial Setup Screen], then push [ENTER Key].
  5. Push [Up arrow key] / [Down arrow key] to select [No], then push [ENTER Key].

    • [No]: The keypad will not show the Initial Setup Screen when the drive is energized.

    • [Yes]: The keypad will show the Initial Setup Screen when the drive is energized.