Remove the drive cover. image/svg+xml CAUTION image/svg+xml Crush Hazard Loosen the cover screws. Do not fully remove them. If you fully remove the cover screws, the terminal cover can fall and cause moderate injury. Unplug the fan cable from the fan connectors. Figure 1. Remove the Fan Cable Fan unit Fan connectors Fan cable Loosen the screws that safety the fan unit and slide the slide panel to the left. Note: To remove the fan unit, it is only necessary to loosen the screws in position B. Remove the screws in position A. Figure 2. Slide the Slide Panel Screw position A Screw position B Slide panel Remove the fan unit and the slide panel at the same time. Figure 3. Remove the Fan Unit Unplug the relay connectors, remove the screws that safety the cooling fans and circulation fan, and then remove the fans. Figure 4. Remove the Cooling Fans and Circulation Fan Cooling fans Relay connectors Fan unit base Circulation fan
