1. Reverse the steps to reattach the cover.
    Note:

    Make sure that you do not pinch wires or signal lines between the front cover and the drive before you reattach the cover.

    Figure 1. Reattach the Front Cover
  2. Use a slotted screwdriver to lock the front cover of the drive.

    Use a slotted screwdriver with a tip width of 2.5 mm (0.1 in) or less and a thickness of 0.4 mm (0.02 in) or less.

    Figure 2. Locking the Front Cover
    • Front cover lock