1. Remove the terminal cover, keypad, and keypad connector, then insert the end of the keypad connector that has the tab into the keypad connector holder on the front cover.
    Figure 1. Remove the Terminal Cover, Keypad, and Keypad Connector
    • Keypad
    • Keypad connector
    • Connector holder
  2. Loosen the front cover screws.
    Figure 2. Loosen the Front Cover Screws
  3. Push on the four tabs found on each side of the front cover, then pull the front cover forward to remove it from the drive.
    Figure 3. Pull Forward to Remove the Front Cover
    • Pull forward to remove the front cover.
    • Unhook the tabs found on the sides of the front cover.
  4. Remove the front cover from the drive.
    Figure 4. Remove the Front Cover