Use the information in Table 1 to install the keypad in the best location for your application. Table 1. Keypad Installation Method Installation Method Features Necessary Tools and Installation Support Sets Outside of the control panel Simplified installation is possible. Separate installation support sets are not necessary. Phillips screwdriver #2 (M3) Inside of the control panel Keypad does not extend farther than the front of the control panel. Phillips screwdriver #2 (M3, M4) Installation support set A (for mounting with screws, model: 900-192-933-001) Phillips screwdriver #2 (M3) Wrench (M4) Installation support set B (for mounting with nut clamp, model: 900-192-933-002) Note: Installation support sets are sold separately. If there are weld studs inside the control panel, use installation support set B. Contact Yaskawa or your nearest sales representative to make an order. Notice image/svg+xml Do not let unwanted objects, for example metal shavings or wire clippings, fall into the drive during drive installation. Put a temporary cover over the drive during installation. Remove the temporary cover before start-up. Unwanted objects inside of the drive can cause damage to the drive.