PID sleep stops drive operation when the PID output or the frequency reference is less than b5-15 [PID Sleep Function Start Level]. This function shuts off drive output after the motor decelerates to the set frequency.

The drive will automatically restart the motor when the PID output or the frequency reference is more than the b5-15 value for the time set in b5-16 [PID Sleep Delay Time].

Figure 1 shows the PID Sleep function.

Figure 1. PID Sleep Time Chart
Note:

  • The PID Sleep function is enabled when PID control is disabled.

  • When the PID Sleep function is triggered, the drive will stop the motor as specified by b1-03 [Stopping Method Selection].