- 0
- Digital Out Only, Always Detect
-
The MFDO terminal set for PID Feedback Low or PID Feedback High [H2-01 to H2-03 = 3E, 3F] activates. When the drive detects feedback loss/excess, the keypad will not show an alarm and the drive will continue operation.
When the feedback signal is less than the level set in b5-13 [PID Feedback Loss Detection Lvl] for longer than the time set in b5-14 [PID Feedback Loss Detection Time], the MFDO terminal set for PID Feedback Low activates.
When the feedback signal is more than the level set in b5-36 [PID High Feedback Detection Lvl] for longer than the time set in b5-37 [PID High Feedback Detection Time] the MFDO terminal set for PID Feedback High activates.
When the feedback value is not in the detection range, the drive resets the MFDO.
- 1
- Alarm + Digital Out, Always Det
-
The drive detects FbL [PID Feedback Loss] and FbH [Excessive PID Feedback]. The MFDO terminal set for PID Feedback Low or PID Feedback High [H2-01 to H2-03 = 3E, 3F] activates. The output terminal set for Alarm [H2-01 to H2-03 = 10] activates and the drive continues operation.
When the feedback signal is less than the level set in b5-13 for longer than the time set in b5-14, the MFDO terminal set for PID Feedback Low activates.
When the feedback signal is more than the level set in b5-36 for longer than the time set in b5-37, the MFDO terminal set for PID Feedback High activates.
When the feedback value is not in the detection range, the drive resets the MFDO.
- 2
- Fault + Digital Out, Always Det
-
The drive detects FbL and FbH. MFDO terminal MA-MC turns ON, MB-MC turns OFF, and the motor coasts to stop.
When the feedback signal is less than the level set in b5-13 for the time set in b5-14, the drive detects FbL.
When the feedback signal is more than the level set in b5-36 for the time set in b5-37, the drive detects FbH.
- 3
- Digital Out Only, @ PID Enable
-
The MFDO terminal set for PID Feedback Low or PID Feedback High activates. The keypad will not show an alarm. The drive continues operation.
When the MFDI terminal set to PID Disable [H1-xx = 19] activates, the drive disables fault detection.
- 4
- Alarm + Digital Out, @PID Enable
-
The drive detects FbL and FbH. The MFDO terminal set for PID Feedback Low or PID Feedback High activates. The output terminal set for Alarm [H2-01 to H2-03 = 10] activates and the drive continues operation.
When the MFDI terminal set to PID Disable [H1-xx = 19] activates, the drive disables fault detection.
- 5
- Fault + Digital Out, @PID Enable
-
The drive detects FbL and FbH. MFDO terminal MA-MC turns ON, MB-MC turns OFF, and the drive coasts to stop.
When the MFDI terminal set to PID Disable [H1-xx = 19] activates, the drive disables fault detection.