|
No.
(Hex.)
|
Name
|
Description
|
Default
(Range)
|
|
F1-14
(038D)
|
Encoder Open-Circuit Detect Time
|
    
Sets the length of time that the drive must not receive a pulse signal to cause PGo [Encoder (PG) Feedback Loss].
|
2.0 s
(0.0 - 10.0 s)
|
If the drive does not detect ouput pulses from the encoder for the time set in F1-14, it will trigger PGo.
Note:
-
When A1-02 = 0 [Control Method Selection = V/f], set H6-01 = 3 [Terminal RP Pulse Train Function = Speed Feedback (V/F Control)] to enable this parameter.
-
Motor speed and load conditions can cause ov [Overvoltage] and oC [Overcurrent] faults.