Jump to main content

MEMOBUS/Modbus MFDI 1 to 3 Function Selection

You can set the function for the MFDI to MEMOBUS register bit 0 to 2 of [15C0(Hex.)]. Use H1-40 to H1-42 [Extend MFDI Function Selection] to select the bit function for each bit.

Note:

  • Refer to MFDI Setting Values for more information about MFDI setting values.

  • You cannot set values 0 [3-Wire Sequence] and 20 to 2F [External Fault] for H1-40 to H1-42.

  • When you will not use H1-40 to H1-42, set them to F [Through Mode].