|
No.
(Hex.)
|
Name
|
Description
|
Default
(Range)
|
|
L1-22
(0768)
RUN
|
Leakage Current Filter Time1
|
    
Sets the leakage current detection reduction filter time constant during constant speed run.
|
Determined by C6-02
(0.0 - 60.0 s)
|
Note:
You can set this parameter when C6-02 = B [Carrier Frequency Selection = Leakage Current Detection Reduction Rate PWM].
If incorrect detection of alarms, for example oL1 [Motor Overload], occur or errors occur in the values on the current monitor because of a leakage current, increase the setting value.