|
No.
(Hex.)
|
Name
|
Description
|
Default
(Range)
|
|
L1-23
(0769)
RUN
|
Leakage Current Filter Time2
|
    
Sets the leakage current detection reduction filter time constant during acceleration/deceleration.
|
Determined by C6-02
(0.0 - 60.0 s)
|
Note:
-
You can set this parameter when C6-02 = B [Carrier Frequency Selection = Leakage Current Detection Reduction Rate PWM].
-
When the setting value increases, the current monitor will start up slowly. Examine the relevant sequence for problems.
If errors occur in the values on the current monitor during acceleration/deceleration, increase the setting value.