L3-23: Stall P Reduction at Constant HP

No. (Hex.)	Name	Description	Default (Range)
L3-23 (04FD)	Stall P Reduction at Constant HP	Sets the function to automatically decrease the Stall Prevention Level during Run for constant output ranges.	0 (0, 1)

No.

(Hex.)

Name

Description

Default

(Range)

L3-23

(04FD)

Stall P Reduction at Constant HP

Sets the function to automatically decrease the Stall Prevention Level during Run for constant output ranges.

(0, 1)

0
Use L3-06 for Entire Speed Range: The drive uses the level set in L3-06 [Stall Prevent Level during Run] through the full speed range.
1
Automatic Reduction @ CHP Region: The drive decreases the Stall Prevention level during run in the constant power range. The lower limit is 40% of L3-06 value.