|
No.
(Hex.)
|
Name
|
Description
|
Default
(Range)
|
|
L3-40
(11D4)
|
Current Limit S-Curve @ Acc/Dec
|
    
Sets the function to enable and disable the best S-curve characteristic used for current-limited acceleration.
|
0
(0, 1)
|
Makes the best motor acceleration rate for start up. If you set this parameter to 1, it will make acceleration smoother, but it can also increase the acceleration time to be longer than the set time. If the drive detects oC [Overcurrent] faults immediately after acceleration starts, set this parameter.
- 0
- Disabled
-
- 1
- Enabled
-
Note:
Set L3-01 = 3 [Stall Prevention during Accel = Current Limit Acceleration] to enable this function.