|
No.
(Hex.)
|
Name
|
Description
|
Default
(Range)
|
|
L6-01
(04A1)
|
Torque Detection Selection 1
|
    
Sets torque detection conditions that will trigger an overtorque or undertorque response from the drive.
|
0
(0 - 8)
|
The drive detects overtorque if the motor current or output torque is more than the level set in L6-02 [Torque Detection Level 1] for the length of time set in L6-03 [Torque Detection Time 1]. The drive detects undertorque if the motor current or output torque is less than the level set in L6-02 for the length the time set in L6-03.
- 0
- Disabled
-
The drive will not detect overtorque or undertorque.
- 1
- oL @ Speed Agree - Alarm only
-
The drive detects overtorque when the output frequency aligns with the frequency reference. Detection does not occur during acceleration/deceleration. The drive outputs an oL3 [Overtorque Detection 1] and operation continues.
- 2
- oL @ RUN - Alarm only
-
When the Run command is enabled, the drive constantly detects overtorque. The drive outputs an oL3 and operation continues.
- 3
- oL @ Speed Agree - Fault
-
The drive detects overtorque when the output frequency aligns with the frequency reference. Detection does not occur during acceleration/deceleration. The drive outputs an oL3 and operation stops.
- 4
- oL @ RUN - Fault
-
When the Run command is enabled, the drive constantly detects overtorque. The drive outputs an oL3 and operation stops.
- 5
- UL @ Speed Agree - Alarm only
-
The drive detects undertorque when the output frequency aligns with the frequency reference. Detection does not occur during acceleration/deceleration. The drive outputs a UL3 [Undertorque Detection 1] and operation continues.
- 6
- UL @ RUN - Alarm only
-
When the Run command is enabled, the drive constantly detects undertorque. The drive outputs a UL3 and operation continues.
- 7
- UL @ Speed Agree - Fault
-
The drive detects undertorque when the output frequency aligns with the frequency reference. Detection does not occur during acceleration/deceleration. The drive outputs a UL3 and operation stops.
- 8
- UL @ RUN - Fault
-
When the Run command is enabled, the drive constantly detects undertorque. The drive outputs a UL3 and operation stops.