|
Setting Value
|
Function
|
Description
|
|
6 A
|
Drive Enable
|
    
Sets the function to show dnE [Drive Disabled] on the keypad and ignore Run commands when the terminal is OFF.
|
If you input the Run command before you turn ON the Drive Enable terminal, you must input the Run command again to operate the drive. When you deactivate the terminal set for Drive Enable while the drive is operating, the drive will use the stopping method set in b1-03 [Stopping Method Selection] to stop the motor.
- ON
- Run command is accepted.
-
- OFF
- Run command is disabled. When the drive is running, it stops according to b1-03 setting.
-