|
No.
(Hex.)
|
Name
|
Description
|
Default
(Range)
|
|
L6-08
(0468)
|
Mechanical Fatigue Detect Select
|
    
Sets the speed where the drive detects mechanical deterioration and how the drive operates (operation status) after detection.
|
0
(0 - 8)
|
The drive detects mechanical weakening through overtorque or undertorque as specified by the conditions set in L6-08 to L6-11 [Mechanical Deterioration Detection Settings Parameters]. Set overtorque/undertorque detection conditions in L6-01 to L6-03 [Torque Detection 1 Settings Parameters]. The drive disables the operation selection set in L6-01 [Torque Detection Selection 1].
- 0
- Disabled
-
The drive does not detect mechanical weakening.
- 1
- oL5 @ Speed > L6-09 - Alarm
-
When the speed (signed) ≥ L6-09 [Mech Fatigue Detect Speed Level], the drive detects mechanical weakening. The drive will detect oL5 [Mechanical Weakening Detection 1] and continue operation.
- 2
- oL5 @ |Speed| > L6-09 - Alarm
-
When the speed (absolute value) ≥ L6-09, the drive detects mechanical weakening. The drive will detect oL5 and continue operation.
- 3
- oL5 @ Speed > L6-09 - Fault
-
When the speed (signed) ≥ L6-09, the drive detects mechanical weakening. The drive will detect oL5 and stop operation.
- 4
- oL5 @ |Speed| > L6-09 - Fault
-
When the speed (absolute value) ≥ L6-09, the drive detects mechanical weakening. The drive will detect oL5 and stop operation.
- 5
- UL5 @ Speed < L6-09 - Alarm
-
When the speed (signed) ≤ L6-09, the drive detects mechanical weakening. The drive will detect UL5 [Mechanical Weakening Detection 2] and continue operation.
- 6
- UL5 @ |Speed| < L6-09 - Alarm
-
When the speed (absolute value) ≤ L6-09, the drive detects mechanical weakening. The drive will detect UL5 and continue operation.
- 7
- UL5 @ Speed < L6-09 - Fault
-
When the speed (signed) ≤ L6-09, the drive detects mechanical weakening. The drive will detect UL5 and stop operation.
- 8
- UL5 @ |Speed| < L6-09 - Fault
-
When the speed (absolute value) ≤ L6-09, the drive detects mechanical weakening. The drive will detect UL5 and stop operation.