H2-36: Comparator 1 Ineffective Time

No. (Hex.)	Name	Description	Default (Range)
H2-36 (159E)	Comparator 1 Ineffective Time	Sets the length of time that CP1 [Comparator1 Limit Fault] is disabled.	0.0 s (0.0 - 1000.0 s)

No.

(Hex.)

Name

Description

Default

(Range)

H2-36

(159E)

Comparator 1 Ineffective Time

Sets the length of time that CP1 [Comparator1 Limit Fault] is disabled.

0.0 s

(0.0 - 1000.0 s)

Note:

After you enter a Run command and wait for the time set in this parameter, the drive will monitor operation and make sure that it is in the Comparator 1 range until you enter the Stop command.
When CP1 detection is disabled, the drive will activate the output terminal set for Comparator 1 [H2-xx = 66].