n8-47: Pull-in Current Comp Filter Time

No. (Hex.)	Name	Description	Default (Range)
n8-47 (053A)	Pull-in Current Comp Filter Time	Sets the time constant the drive uses to align the pull-in current reference value with the actual current value. Usually it is not necessary to change this setting.	5.0 s (0.0 - 100.0 s)

Adjust this parameter in these conditions:

• If the time for the reference value of the pull-in current to align with the target value is too long, increase the setting value.

• If vibration or hunting occur, decrease the setting value in 0.2 unit increments.

• If the motor stalls during run at constant speed, decrease the setting value in 0.2 unit increments.