n8-48: Pull-in/Light Load Id Current

No. (Hex.)	Name	Description	Default (Range)
n8-48 (053B) RUN	Pull-in/Light Load Id Current	On the basis that parameter E5-03 [Motor Rated Current (FLA)] is the 100% value, this parameter sets the d-axis current that flows to the motor during run at constant speed as a percentage.	30% (0 - 200%)

No.

(Hex.)

Name

Description

Default

(Range)

n8-48

(053B)

RUN

Pull-in/Light Load Id Current

On the basis that parameter E5-03 [Motor Rated Current (FLA)] is the 100% value, this parameter sets the d-axis current that flows to the motor during run at constant speed as a percentage.

30%

(0 - 200%)

Adjust in the following situations.

Slightly reduce this value if there is too much current when driving a light load at a constant speed.
Increase the setting value in steps of 5% when hunting or vibration occurs during run at constant speed.
Increase the setting value in steps of 5% if the motor stalls during run at constant speed.