n8-54: Voltage Error Compensation Time

No. (Hex.)	Name	Description	Default (Range)
n8-54 (056D) Expert	Voltage Error Compensation Time	Sets the time constant that the drive uses when adjusting for voltage errors.	1.00 s (0.00 - 10.00 s)

Adjust this parameter in these conditions:

• If oscillation occurs at the time of start up, increase the setting value.

• If hunting occurs when operating at low speed, increase the setting value.

• If fast changes in the load cause hunting, increase the setting value in 0.1-unit increments. If you cannot stop hunting, set n8-51 [Pull-in Current @ Acceleration] to 0% and set n8-54 to 0.00 s, and disable compensation for voltage errors.