T1-00: Motor 1/Motor 2 Selection

No. (Hex.)	Name	Description	Default (Range)
T1-00 (0700)	Motor 1/Motor 2 Selection	Sets which motor to tune when motor 1/2 switching is enabled.	1 (1, 2)

No.

(Hex.)

Name

Description

Default

(Range)

T1-00

(0700)

Motor 1/Motor 2 Selection

Sets which motor to tune when motor 1/2 switching is enabled.

(1, 2)

Note:

SetH1-xx = 16 [Motor 2 Selection] to enable this parameter. When H1-xx ≠ 16 the keypad will not show this parameter.

1
Motor 1: Auto-Tuning automatically sets parameters E1-xx and E2-xx for motor 1.
2
Motor 2: Auto-Tuning automatically sets parameters E3-xx and E4-xx for motor 2. Make sure that you connect motor 2 to the drive for Auto-Tuning.