o4-24: bAT Detection Selection

No. (Hex.)	Name	Description	Default (Range)
o4-24 (310F) RUN	bAT Detection Selection	Sets the operation when the drive detects bAT [Keypad Battery Low Voltage] and TiM [Keypad Time Not Set]. This parameter is only available when you use an LCD keypad.	0 (0 - 2)

No.

(Hex.)

Name

Description

Default

(Range)

o4-24

(310F)

RUN

bAT Detection Selection

Sets the operation when the drive detects bAT [Keypad Battery Low Voltage] and TiM [Keypad Time Not Set]. This parameter is only available when you use an LCD keypad.

(0 - 2)

0
Disable: The drive will not detect bAT or TiM.
1
Enable (Alarm Detected): The keypad shows bAT or TiM and the drive continues operation. The output terminal set to Alarm [H2-01 to H2-03 = 10] activates.
2
Enable (Fault Detected): The output turns off and the motor coasts to stop. The output terminal set for Fault [H2-01 to H2-03 = E] activates.