H3-01: Terminal A1 Signal Level Select

No. (Hex.)	Name	Description	Default (Range)
H3-01 (0410)	Terminal A1 Signal Level Select	Sets the input signal level for MFAI terminal A1.	0 (0, 1)

No.

(Hex.)

Name

Description

Default

(Range)

H3-01

(0410)

Terminal A1 Signal Level Select

Sets the input signal level for MFAI terminal A1.

(0, 1)

0
0 to 10V (Lower Limit at 0): The voltage signal is 0 Vdc to 10 Vdc. The minimum input level limit is 0%. The drive will read a negative input signal caused by gain and bias settings as 0%.
1
0 V to 10 V (Without Lower Limit): The voltage signal is 0 Vdc to 10 Vdc. When this setting is used as the frequency reference, the motor runs reverse when the Forward run command is input, or runs forward when the Reverse run signal is input, while the signal is a negative number due to gain and bias.