Use this procedure to unlock parameter settings.

Set the password in A1-05 [Password Setting], and show the Parameter Setting Mode screen on the keypad.

This procedure verifies the password, and makes sure that the parameter settings are unlocked.

  1. Push [Up arrow key] or [Down arrow key] to select “A: Initialization Parameters”, then push [ENTER Key].
  2. Push [Up arrow key] or [Down arrow key] to select [A1-04], then push [ENTER Key].

    You can now change parameter settings.

  3. Push [Right Key] or [Left Key] to move the digit and enter the password.
  4. Push [ENTER Key] to confirm the password.

    The drive unlocks the parameters and automatically shows the Parameters Screen.

  5. Push [Up arrow key] or [Down arrow key] to show [A1-02], then push [ENTER Key].

    The keypad shows the setting value for [A1-02].

  6. Push [Up arrow key] or [Down arrow key] to make sure that you can change the setting value.

Push [F1 Key] (Back) until the keypad shows the Parameter Setup Mode screen.