|
No.
(Hex.)
|
Name
|
Description
|
Default
(Range)
|
|
F1-13
(038C)
|
Encoder 2 Gear Teeth 1
|
        
Sets the number of gear teeth on the load side. This parameter and F1-12 [Encoder 1 Gear Teeth 1] set the gear ratio between the motor and encoder.
|
0
(0 - 1000)
|
After you set the number of gear teeth, the drive uses this formula to calculate the motor speed:
Note:
When F1-12 = 0 or F1-13 = 0, the gear ratio is 1.