|
No.
(Hex.)
|
Name
|
Description
|
Default
(Range)
|
|
b3-03
(0193)
|
Speed Search Deceleration Time
|
        
Sets the deceleration time during Speed Search operation. Set the length of time to decelerate from the maximum output frequency to the minimum output frequency.
|
2.0 s
(0.1 - 10.0 s)
|
This is the output frequency deceleration time used by Current Detection Speed Search and by the Current Injection Method of Speed Estimation Speed Search.
Note:
-
When A1-02 = 8 [Control Method Selection = EZOLV], this parameter takes effect only in Expert Mode.
-
If the drive detects oL1 [Motor Overload] during Current Detection Speed Search, decrease the value set in b3-03.