No.

(Hex.)

Name

Description

Default

(Range)

F4-01

(0391)

Terminal V1 Function Selection

Sets the monitor signal (Ux-xx) output from terminal V1.

102

(000 - 9999)
Note:

  • Set the x-xx part of the Ux-xx [Monitor]. For example, set F4-01 = 102 to monitor U1-02 [Output Frequency].

    When the x part of Ux is a letter, replace the letter (hexadecimal number) with a decimal number. For example, set F4-01 = 1301 to monitor Ud-01.

  • You cannot use all of the monitors in all of the control methods.

  • When you use the terminal in through mode, set this parameter to 000 or 031. You can use this setting to adjust the V1 terminal output from PLC through MEMOBUS/Modbus communications or a communications option.