|
No.
(Hex.)
|
Name
|
Description
|
Default
(Range)
|
|
C1-11
(020A)
|
Accel/Decel Time Switching Frequency
|
        
Sets the frequency at which the drive will automatically change acceleration and deceleration times.
|
Determined by A1-02
(0.0 - 590.0 Hz)
|
When the output frequency is at the C1-11 value, the drive automatically switches the acceleration and deceleration times. Set this parameter to 0.0 to disable this function.
Figure 1. Accel/Decel Time Switchover Freq
Table 1 lists the possible combinations of acceleration and deceleration time switchover frequencies and the acceleration times for the Motor 2 Selection function.
Table 1. Motor and Acceleration and Deceleration Time Combination
|
C1-11
|
Motor 1
|
Motor 2
|
|
Acceleration Time
|
Deceleration Time
|
Acceleration Time
|
Deceleration Time
|
|
Less than the setting value
|
C1-07 [Acceleration Time 4]
|
C1-08 [Deceleration Time 4]
|
C1-07 [Acceleration Time 4]
|
C1-08 [Deceleration Time 4]
|
|
Equal to or more than the setting value
|
C1-01 [Acceleration Time 1]
|
C1-02 [Deceleration Time 1]
|
C1-05 [Acceleration Time 3]
|
C1-06 [Deceleration Time 3]
|