|
No.
(Hex.)
|
Name
|
Description
|
Default
(Range)
|
|
F6-32
(03CD)
|
PROFIBUS-DP Data Format Select
|
        
Sets the data format of PROFIBUS-DP communication. Restart the drive after you change the parameter setting.
|
0
(0 - 5)
|
Note:
The H5-11 [Comm ENTER Command Mode] setting makes the RAM enter command necessary or not necessary to write parameters over network communication. When F6-32 = 0, 1, or 2, the H5-11 setting does not have an effect. The RAM enter command is always necessary to write parameters.
- 0
- PPO Type
-
- 1
- Conventional
-
- 2
- PPO (bit0)
-
This function operates when bit 0 and bit 4 in the register STW have values of 1 (operate). Refer to the PROFIBUS-DP communication manual for more information.
- 3
- PPO (Enter)
-
- 4
- Conventional (Enter)
-
- 5
- PPO (bit0, Enter)
-
This function operates when bit 0 and bit 4 in the register STW have values of 1 (operate). Refer to the PROFIBUS-DP communication manual for more information.