E3-01: Motor 2 Control Mode Selection

No. (Hex.)	Name	Description	Default (Range)
E3-01 (0319)	Motor 2 Control Mode Selection	Sets the control method for motor 2.	0 (0 - 3)

No.

(Hex.)

Name

Description

Default

(Range)

E3-01

(0319)

Motor 2 Control Mode Selection

Sets the control method for motor 2.

(0 - 3)

Note:

When you change this setting, the drive will set all parameters that are dependent on this parameter to their default settings.
Parameter L1-01 [Motor Overload (oL1) Protection] sets the protection operation of oL1 [Motor Overload] the same as Motor 1.
When you use parameter A1-03 [Initialize Parameters] to initialize the drive, this parameter is not reset.