L1-03: Motor Thermistor oH Alarm Select

No. (Hex.)	Name	Description	Default (Range)
L1-03 (0482)	Motor Thermistor oH Alarm Select	Sets drive operation when the PTC input signal entered into the drive is at the oH3 [Motor Overheat Alarm] detection level.	3 (0 - 3)

No.

(Hex.)

Name

Description

Default

(Range)

L1-03

(0482)

Motor Thermistor oH Alarm Select

Sets drive operation when the PTC input signal entered into the drive is at the oH3 [Motor Overheat Alarm] detection level.

(0 - 3)

0
Ramp to Stop: The drive ramps the motor to stop in the deceleration time. Fault relay output terminal MA-MC turns ON, and MB-MC turns OFF.
1
Coast to Stop: The output turns off and the motor coasts to stop. Fault relay output terminal MA-MC turns ON, and MB-MC turns OFF.
2
Fast Stop (Use C1-09): The drive stops the motor in the deceleration time set in C1-09 [Fast Stop Time]. Fault relay output terminal MA-MC turns ON, and MB-MC turns OFF.
3
Alarm Only: The keypad shows oH3 and the drive continues operation. The output terminal set for Alarm [H2-01 to H2-04 = 10] activates.