L1-20: Motor Overheat (oH5) Selection

No. (Hex.)	Name	Description	Default (Range)
L1-20 (0445) Expert	Motor Overheat (oH5) Selection	Sets the drive operation when the NTC input signal to the drive is at the oH5 [Motor Overheat (NTC Input)] detection level.	1 (0 - 3)

No.

(Hex.)

Name

Description

Default

(Range)

L1-20

(0445)

Expert

Motor Overheat (oH5) Selection

Sets the drive operation when the NTC input signal to the drive is at the oH5 [Motor Overheat (NTC Input)] detection level.

(0 - 3)

0
Ramp to Stop: The drive ramps to stop in the set deceleration time. Fault relay output terminal MA-MC turns ON, and MB-MC turns OFF.
1
Coast to Stop: The output turns OFF and the motor coasts to stop. Fault relay output terminal MA-MC turns ON, and MB-MC turns OFF.
2
Fast Stop (Use C1-09): The drive stops the motor in the deceleration time set in C1-09 [Fast Stop Time]. Fault relay output terminal MA-MC turns ON, and MB-MC turns OFF.
3
Alarm Only: The keypad shows oH5 [Motor Overheat (NTC Input)], and the drive continues to operate. The output terminal set to H2-01 to H2-04 = 10 [Alarm] activates.