L7-02: Reverse Torque Limit

No. (Hex.)	Name	Description	Default (Range)
L7-02 (04A8) RUN	Reverse Torque Limit	Sets the torque limit value for reversed motoring as a percentage, where motor rated torque is the 100% value.	200% (0 - 300%)

No.

(Hex.)

Name

Description

Default

(Range)

L7-02

(04A8)

RUN

Reverse Torque Limit

Sets the torque limit value for reversed motoring as a percentage, where motor rated torque is the 100% value.

200%

(0 - 300%)

Note:

Use this method to set the torque limit and enable the lower torque limit:
- Set H3-02, H3-06, or H3-10 = 10, 15 [MFAI Function Select = Forward, Reverse/Regenerative Torque Limit].
- Use a communication option to set the torque limits
You must think about drive capacity when a large quantity of torque is necessary. If you set the value too high, the drive can detect oC [Overcurrent].
If you set the value too low with large loads, the motor can stall.