n1-03: Hunting Prevention Time Constant

No. (Hex.)	Name	Description	Default (Range)
n1-03 (0582) Expert	Hunting Prevention Time Constant	Sets the primary delay time constant of the hunting prevention function. Usually it is not necessary to change this parameter.	Determined by o2-04 (0 - 500 ms)

No.

(Hex.)

Name

Description

Default

(Range)

n1-03

(0582)

Expert

Hunting Prevention Time Constant

Sets the primary delay time constant of the hunting prevention function. Usually it is not necessary to change this parameter.

Determined by o2-04

(0 - 500 ms)

Adjust this parameter in these conditions:

Load inertia is large: Increase the setting value. If the setting value is too high, response will be slower. Also, there will be oscillation when the frequency is low.
Oscillation occurs at low frequencies: Decrease the setting value.