|
No.
(Hex.)
|
Name
|
Description
|
Default
(Range)
|
|
n3-04
(058B)
Expert
|
HSB Overload Time
|
        
Sets the time used to detect oL7 [High Slip Braking Overload], which occurs when the output frequency does not change during high-slip braking. Usually it is not necessary to change this parameter.
|
40 s
(30 - 1200 s)
|
If a force on the load side is rotating the motor or if there is too much load inertia connected to the motor, the drive will detect oL7.
The current flowing to the motor from the load can overheat the motor and cause burn damage to the motor. Set this parameter to prevent burn damage to the motor.