|
No.
(Hex.)
|
Name
|
Description
|
Default
(Range)
|
|
n4-70
(1B8A)
|
Speed Command Comp @ Low Freq
|
        
Sets the function to make the drive more stable when operating at low speeds. Usually it is not necessary to change this setting.
|
1.00 Hz
(0.00 - 6.00 Hz)
|
This function makes the control more stable when you operate at low speeds.
-
If the load is light when the drive operates in the low speed range, increase the setting value in 0.3 Hz increments.
Note:
Increase the setting value to increase the stability when the drive is operating at low speed. It can make the speed control less accurate.
-
When the motor rotates faster than the frequency reference at low speed, decrease the setting value in 0.1 Hz increments.
Note:
If you set the value too low, the motor can rotate in reverse.