|
No.
(Hex.)
|
Name
|
Description
|
Default
(Range)
|
|
n7-11
(311B)
Expert
|
Drv Mode Switch Hysteresis Band
|
        
Usually it is not necessary to change this setting. Sets the hysteresis level for Switching Speed set in n7-10 [Pull-in Current Switching Speed].
|
5.0%
(1.0 - 20.0%)
|
When the speed is lower than n7-10 + n7-11 during acceleration, the drive enables pull-in current.
Note:
-
When the drive accelerates, it enables these settings:
-
If there is a large quantity of oscillation when you operate in the low speed range, increase the setting value.
-
When it is most important to save energy in the low speed range, decrease the setting value.