|
No.
(Hex.)
|
Name
|
Description
|
Default
(Range)
|
|
n8-04
(0543)
Expert
|
Pole Alignment Time
|
        
Sets the length of the Polar Attraction Time, which is used for Z Pulse Offset Tuning. Usually it is not necessary to change this setting.
|
1.5 s
(1.5 - 5.0 s)
|
Sets the length of time that the pull-in current flows when the drive detects the motor magnetic pole of the rotors.
Note:
If the motor oscillates at the time of the polar attraction, increase the value in 0.5 s increments. If you set the value too high, the drive will detect oL2 [Drive Overload].