|
No.
(Hex.)
|
Name
|
Description
|
Default
(Range)
|
|
n8-79
(05FE)
|
Pull-in Current @ Deceleration
|
        
Sets the pull-in current that can flow during deceleration as a percentage of the E5-03 [PM Motor Rated Current (FLA)].
|
50%
(0 - 200%)
|
If overcurrent occurs during deceleration, slowly decrease the setting in 5% increments.
Note:
When n8-79 = 0, the drive will use the value set in n8-51 [Pull-in Current @ Acceleration].