n8-94: Flux Position Estimation Method

No. (Hex.)	Name	Description	Default (Range)
n8-94 (012D) Expert	Flux Position Estimation Method	Sets the criteria that the drive uses to find changes in speed or load. Usually it is not necessary to change this setting.	Determined by d5-01 (0, 1)

No.

(Hex.)

Name

Description

Default

(Range)

n8-94

(012D)

Expert

Flux Position Estimation Method

Sets the criteria that the drive uses to find changes in speed or load. Usually it is not necessary to change this setting.

Determined by d5-01

(0, 1)

0
Softstarter
1
Speed Feedback: Set n8-57 = 1 [HFI Overlap Selection = Enabled] to enable this parameter. Increases the stability when the speed or load suddenly change, for example with rapid acceleration/deceleration or impact loads.