F6-35: CANopen Node ID Selection

No. (Hex.)	Name	Description	Default (Range)
F6-35 (03D0)	CANopen Node ID Selection	Sets the node address for CANopen communication. Restart the drive after you change the parameter setting.	0 (0 - 126)

No.

(Hex.)

Name

Description

Default

(Range)

F6-35

(03D0)

CANopen Node ID Selection

Sets the node address for CANopen communication. Restart the drive after you change the parameter setting.

(0 - 126)

Note:

Be sure to set an address that is different than all other node addresses. Do not set this parameter to 0. Incorrect parameter settings will cause AEr [Station Address Setting Error] errors and the L.ERR LED on the option will come on.