o1-24 to o1-35: Custom Monitor 1 to 12

Set the x-xx part of the Ux-xx [Monitor]. For example, set o1-24 = 102 to monitor U1-02 [Output Frequency].

When the x part of Ux is a letter, replace the letter (hexadecimal number) with a decimal number. For example, set o1-24 = 1301 to monitor Ud-01.

You can show a maximum of three selected monitors on one LCD keypad screen.

• When you select only one monitor, the text size of this monitor increases. For example, when o1-25 to o1-35 = 0, the text size of the monitor saved in o1-24 increases.

• When you select two monitors, the text size of these monitors increase.

• When you select four or more monitors, the keypad shows the fourth monitor and all additional monitors on the next screens.

You can show monitors selected with o1-24 to o1-26 as a bar graph, analog gauge, or trend plot.

• Bar graph display: 3 monitors maximum

  Select with o1-24, o1-25, and o1-26.

• Analog gauge display: 1 monitor

  Select with o1-24.

• Trend plot display: 2 monitors

  Select with o1-24 and o1-25.

You can only set parameters o1-24 to o1-26 with analog output monitors.

You can set all monitors to parameters o1-27 to o1-35.